Lightning is perhaps the most spectacular display of the awesome force and raw power of nature. It's also the most dangerous and frequently-encountered weather hazard that most people experience each year, according to the National Severe Storm Laboratory.
Considering a single bolt of lightning can carry over 100 million volts of electricity, it's not surprising that it can cause damage to homes in a number of ways:
- A direct strike to a structure can rip through roofs and chimneys, explode brick and concrete, and ignite fires.
- An indirect or secondary lightning strike to a nearby tree or power line can induce unwanted surges into a home.
- Lightning can also enter through phone, cable lines, and computer modems, as well as roof projections such as weather vanes, antennas and satellite dishes.
- Home extras like irrigation systems, invisible fences, and electric gates can provide a low-resistance pathway for lightning's destructive energy.
Protecting your home
Each year thousands of home and other properties are destroyed or damaged by lightning strikes. The first step to protecting your home is contacting a professional who is qualified to design and install a certified lightning protection system. It will be designed to control or force the discharge onto a specified path, thereby eliminating the chance of fire or explosion within non-conductive parts of the house such as those made of wood, brick, tile, etc. A lightning protection system is not intended to prevent a strike. Its purpose is to provide a safe path on which the current can be safely directed to the ground.
Keep in mind this is not a do-it-yourself project. Only experienced and reputable lighnting protection contractors listed by Underwriters Laboratories (UL) listed and certified by Lightning Protection Institute (LPI) should install these systems. Qualified specialists use UL-listed materials and ensure that methods of installation comply with nationally recognized safety standards of LPI, UL and the National Fire Protection Association (NFPA).
A typical lightning protection system
A complete system is made up of the following components:
- Air terminals: Also referred to as lightning rods, these inconspicuous copper or aluminum rods are vertically mounted on the roof at regular intervals. The air terminals serve as strike receptors, designed to intercept the lightning strike.
- Main conductors: Constructed of aluminum or copper, these braided cables connect the air terminals to the other system components and the grounds.
- Grounds: A minimum of two ground rods, driven at least 10 feet deep in the earth are required for all structures. The ground terminations direct the dangerous current into the ground, to eliminate the chance of injury or damage to the structure.
- Bonds: Bonding joins metallic bodies (roof components) and grounded building systems to the main conductor to ensure conductivity and prevent side flashing (lightning jumping between two objects).
- Surge arresters and suppressors: A surge is an increase in electrical current due to a lightning strike on or near a power line or utility service. Surge suppression is installed at the electrical panel(s) to prevent the entrance of overvoltages which can cause a fire. Arresters installed at electrical panels help protect heavy appliances and prevent fires at service panel entrances. Additional devices may be needed to protect other in-house electronics. Surge protection devices are typically installed in conjunction with a lightning protection system.
- Tree protection: The Lightning Protection Institute recommends that any tree taller than a home or within 10 feet of the structure be equipped with a lightning protection system. Trees do not offer protection and many homeowners choose to have trees protected for their own value. An unprotected tree in close proximity to a structure can also create a side-flash hazard to the nearby home.
State Farm® (incluyendo State Farm Mutual Automobile Insurance Company y sus subsidiarias y afiliadas) no se hace responsable y no apoya ni aprueba, implícita ni explícitamente, el contenido de ningún sitio de terceros vinculado por hiperenlace con esta página. State Farm no tiene la facultad para modificar, actualizar ni controlar el contenido de los sitios de terceros vinculados por hiperenlace. El acceso a los sitios de terceros queda a riesgo del propio usuario, se proporciona sólo para propósitos informativos y no es una solicitación de compra ni venta de ninguno de los productos a los que pueda hacerse referencia en tales sitios de terceros.
La información en este artículo se obtuvo de varias fuentes que no están relacionadas con State Farm. Aunque creemos que es confiable y precisa, no garantizamos la precisión ni la confiabilidad de la misma. Estas sugerencias no son una lista completa de todas las medidas de control de pérdida. La información no pretende reemplazar los manuales o instrucciones provistos por el fabricante o el consejo de un profesional calificado. Ni pretende activar la cobertura de nuestra póliza. State Farm no garantiza los resultados del uso de esta información.